EVAL-ADE7762EBZ【PDF 1/28 页】BOARD EVALUATION FOR ADE7762

收藏本站

您好，
买卖IC网欢迎您。
请登录
免费注册

买卖IC网

Sheet目录1214

[1页]2页 3页 4页 5页

Polyphase Energy Metering IC

with Phase Drop Indication

ADE7762

FEATURES

High accuracy supports 50 Hz/60 Hz IEC 62053-21

Less than 0.1% error over a dynamic range of 500 to 1

Compatible with 3-phase, 3-wire delta and 3-phase, 4-wire

Wye configurations

Supplies average active power on the frequency outputs F1

and F2

High frequency output (CF) is intended for calibration and

supplies instantaneous active power

Logic output REVP indicates a potential miswiring or

negative power on the sum of all phases

Dropout indication for each phase on LED driver pins

Phase sequence error detection

Direct drive for electromechanical counters and 2-phase

stepper motors (F1 and F2)

Proprietary ADCs and DSP provide high accuracy over large

variations in environmental conditions and over time

On-chip power supply monitoring

On-chip creep protection (no load threshold)

On-chip reference 2.4 V ± 8% (25 ppm/°C typical) with

external overdrive capability

Single 5 V supply, low power (42.5 mW typical)

Low cost CMOS process

GENERAL DESCRIPTION

The ADE7762 is a high accuracy polyphase electrical energy

measurement IC. The ADE7762 specifications surpass the

accuracy requirements as quoted in the IEC62053-21 standard.

The only analog circuitry used in the ADE7762 is in the

analog-to-digital converters (ADCs) and reference circuit. All

other signal processing (for example, multiplication, filtering,

and summation) is carried out in the digital domain. This

approach provides superior stability and accuracy over

extremes in environmental conditions and over time.

The ADE7762 supplies average active power information on

the low frequency outputs, F1 and F2. These logic outputs can

be used to directly drive an electromechanical counter or to

interface with a microcontroller (MCU). The CF logic output

gives instantaneous active power information. This output is

intended to be used for calibration purposes.

The ADE7762 includes a power supply monitoring circuit on the

V DD pin. The ADE7762 remains inactive until the supply voltage

on V DD reaches 4 V. If the supply falls below 4 V, the ADE7762

resets and no pulses are issued on F1, F2, and CF.

A multiple multiplexed logic output provides phase dropout per

phase, reverse polarity per phase, and a phase sequence error.

Internal phase matching circuitry ensures that the voltage and

current channels are phase matched. An internal no load

threshold ensures that the ADE7762 does not exhibit any creep

when there is no load.

The ADE7762 is available in a 28-lead SOIC package.

Rev. 0

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781.329.4700 www.analog.com

发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

*型号	*数量	厂商	批号	封装

添加更多采购

采购需求

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

我的联系方式